Need help deciding whether to take your faulty vacuum motor to get repaired or do it yourself at home?
It may be difficult to tell whether a part needs to be repaired, rebuilt, or completely replaced.
Unfortunately, any unexpected fault might stop the entire operation of your vacuum and result in a significant loss for your pocket.
Fortunately, a few signs might let you know or show you that it’s time for your vacuum to get motor repairs done.
If your vacuum loses suction, you hear a groaning noise from your machine; the vacuum emits burning smells, and the machine overheats; you should take your vacuum to a local repair shop.
5 Signs Your Vacuum is Busted
If you’ve spent a lot of money on a high-quality vacuum in the hopes that it will serve you a lifetime, you must be aware of the signals that it needs to be repaired.
Here are some typical signs that show visiting the store is necessary.
Strange Noises Coming from the Vacuum
The majority of vacuum cleaners are at least somewhat noisy. However, if your vacuum cleaner is becoming noisier or makes odd noises while in operation, this might indicate that it is reaching the end of its useful life.
Strange noises from your machine may occasionally result from debris being lodged in the hoses, brushes, or filter, or they may indicate that the dirt-collecting bin needs to be cleaned out.
It may be time to start looking for a new vacuum if the noises continue even after you’ve checked out these other probable problems.
Loss of Suction
Good suction is essential for attaining a clean floor. Without sufficient suction, it won’t suck dirt and dust; instead, it’ll just push them to the surface.
There are a few potential causes if you’ve discovered that your vacuum’s suction isn’t as strong as it once was.
First, look for any obstructions in the hose. It’s critical to regularly clean out the hose since an accumulation of junk can significantly diminish suction power.
If the hose is clean, but the suction issue still exists, there probably is a problem with the vacuum motor.
In order to prevent more harm to your vacuum cleaner, you should have this more serious issue repaired by an expert as immediately as you can.
Burning Vacuum Smell
A burning smell indicates minor annoyances to serious problems. In any case, it’s better to be cautious and deal with the issue immediately.
Burning smells may also indicate a blocked or damaged suction belt that is being overheated by the engine.
To release the vacuum belt, see if anything prevents it from rotating, such as a thread or carpet fiber.
A more severe scenario is that your motor is broken and has caught fire from overheating.
Wrong Vacuum for the Job
You may be aware that vacuums are designed for the kind of floors they should work on.
Some users, lacking this knowledge, use their vacuums recklessly on any surface and make their vacuums suffer.
Consult your vacuum manufacturer to know the surface your vacuum is meant to clean. If you have been doing it wrong, you need to repair your vacuum.
Blocked Vacuum Filters
Filters are sometimes used in place of or in addition to dirt canisters in central vacuum systems, and they must be cleaned or replaced regularly. A blocked vacuum filter indicates that you may need to visit a local vacuum repair shop.
Furthermore, one of the most crucial suggestions for keeping your central vacuum system is to wipe out and replace filters as necessary. You should typically change these filters two to four times a year.
You ought to be replacing and cleaning your reusable central air filters regularly.
Testing and Troubleshooting a Central Vacuum Motor
You will need basic manual equipment, a digital multimeter, and a non-contact voltage tester to diagnose and repair central vacuum cleaner systems.
Despite small design differences between different makes and models of central vacuum cleaner systems, all of these systems have the same general problems, and the steps for diagnosing and fixing those issues are almost the same.
What Does it Mean When You Hear a Click When You Try to Turn on the Vacuum?
If your vacuum’s motor has broken down, you will hear a clicking sound when trying to start it.
This clicking sound is the noise of a breaker falling off each time you turn the power switch to make the machine go on.
Strong Smell from the Vacuum Unit
If you smell anything burnt, that is probably an indicator that your motor is burnt. The smell is particularly of the burnt plastic coating surrounding the copper wire. If there isn’t any smell, you should start the vacuum and check the motor.
How to Hot Wire the Vacuum Unit?
Take out the motor from the vacuum system’s inside, and you will see two or probably three wires coming out.
Separate the black and white wires from the others, and hot wire with a patch cord with 110 volts lead.
If after all the self-repairing, the motor works, to your luck, you have saved yourself a considerable number of dimes.
But, if not, you know there’s no hope for your motor, and you need to replace it.
Always Test the Vacuum’s Wire Connections
Control wire issues are rare, but when they do arise, they are typically the result of loose wiring at wall outlets. It’s more probable that the attachment’s plug is broken or that the wand’s switch is broken.
Keeping the switch in the on position, use a digital multimeter to test for consistency in the attachments’ wiring.
On the LCD of the meter, a functional switch and the wire that goes with it will show “0.000”. Use a switch that is identical to the defective one.
Should You Replace or Repair it?
Central vacuum systems provide a lot of benefits. But the decision to repair or replace a vacuum depends upon many factors, such as the warranty, usage years, and performance.
If the vacuum is old enough, it only makes sense to replace it since you are not covered by warranty anymore.
Given the limited lifespan of such equipment, it’s only a matter of time before the machine will meet its doom, so investing in repairing doesn’t make any sense.
Moreover, with a new vacuum, you get better performance and can choose from various features.
When to Replace Your Vacuum?
It makes sense and is economical to update your vacuum cleaner if it is over ten years old.
In the last few years, vacuum cleaners have made significant advancements. Vacuums nowadays have more power while also becoming smaller and quieter.
Since they have the suction force to handle most problems, lightweight stick vacuums are more practical solutions available.
When to Repair Your Motor?
You can get it repaired when you notice any of the above-explained signs exhibited by your device.
Ensure that bearings and other moving components are properly greased, and examine the motor regularly.
While performing this inspection, make sure the motor brushes are in good condition. These brushes degrade with time and may need to be changed sometimes.
Call a specialist if the motor has a problem that must be fixed or replaced.
You can determine if your vacuum needs to be repaired or replaced based on the warning indicators listed above in this article. When troubleshooting a vacuum cleaner, following a step-by-step process can assist in swiftly identifying the issue and, consequently, in determining the best course of action.